QUATTRO B6AC allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration.
Internal independent lithium battery balancer:
QUATTRO B6AC employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging. Balancing individual cells battery discharging During the process of discharging, SKYRC QUATTRO B6AC can monitor and balance each cell of the battery individually.
Automatic charging current limit:
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery, it is useful for the NiMH battery of low impedance and capacity in the ‘AUTO’ charging mode. Capacity limit.
The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
Processing time limit:
You can also limit the maximum process time to avoid any possible defects.
The maximum of five batteries’ data can be stored for each output(4×5SET). You can keep the data pertaining to the program setting of the battery of continuous charging or discharge. Users can call out these data at any time without any special program setting.
PC based analysis using USB Communication:
QUATTRO B6AC offer PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity curves. It also shows the individual voltage of each cell in the Lithium battery pack.
|Input Voltage (V AC)||100 ~ 240|
|DC Input Voltage Range (V)||11 ~ 18|
|Output Power(Watt)||4 x 80W|
|Charge Current Range (A)||0.1 to 6|
|Maximum Discharge Power (W)||10|
|Dischage Current Range (A)||0.1 ~ 2.0|
|Drain Current for Balancing Li-Po’s (mA/Cell)||300|
|Li-ion/Po cell count||1 ~ 6|
|NiCd/NiMH cell count||1~15 Cell x 4|
|Pb battery voltage||2 ~ 20|
|Dimensions (mm) LxWxH||225 x 70 x 66|