This L298N Based Motor Driver Module is a high power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L298 motor driver IC and has the onboard 5V regulator which it can supply to an external circuit. It can control up to 4 DC motors, or 2 DC motors with directional and speed control
Pins:
Out1: Motor A lead out
Out2: Motor A lead out
Out3: Motor B lead out
Out4: Mo (Can actually be from 5v-35v, just marked as 12v)
GND: Ground
5v: 5v input (unnecessary if your power source is 7v-35v, if the power source is 7v-35v then it can act as a 5v out)
EnA: Enables PWM signal for Motor A (Please see the “Arduino Sketch Considerations” section)
In1: Enable Motor A
In2: Enable Motor A
In3: Enable Motor B
In4: Enable Motor B
EnB: Enables PWM signal for Motor B (Please see the “Arduino Sketch Considerations” section)
Specification
| Driver Model | L298N 2A |
| Driver IC | Double H Bridge L298N |
| Max Supply Voltage (V) | 46 |
| Mx Operating Current (A) | 2 |
| Ligocal Voltage | 5V |
| Driver Current | 2A |
| Logical Current | 0-36mA |
| Maximum Power (W) | 25W |
| Length (mm) | 44 |
| Width (mm) | 44 |
| Height (mm) | 28 |
| Weight (Kg) | 25 gm |
| Operating Voltage (VDC) | 5 ~ 35 |
Reviews
There are no reviews yet.